Tankless water heater Stiebel Eltron offers tools to address any problems associated with water heating. The smallest outdoor tankless water heater has a capacity of 200 liters, the largest – 3000. In addition, some devices can be connected in parallel or sequentially. Therefore, whatever amount of hot water is not required, the technique Stiebel Eltron tankless water heater able to provide its preparation. Breadth of scope a designer may be limited opportunities to the local mains. Of course, the need to pre-arrange to have enough working space for the very bulky devices.
Also, consumers will appreciate the rich choice of devices on the engine power characteristics. The power spectrum of the heating elements, the proposed STIEBEL ELTRON, lies in the range from 12 to 36 kW. Moreover, the maximum power of the heating flange is not always identical to the maximum, which is capable device. Different models of storage water heaters SB series are not alone, as usual, but two or even three-flanged openings. This is the unique devices SB – they are flexible. Suppose you set the device volume of 600 liters of SB with two holes under the flanges. To ensure all existing water pumping points you had enough of a heating flange capacity, for example, 18 kW. But over time, additional demand for hot water. Usually in this situation have to buy a new more powerful device, but only if it is not the heater SB. Enough to buy another flange suitable power – the need is satisfied at minimum cost.
In one unit SB 650 / 3 AC, if there is such a need, you can install three flange with TENami power of 36 kW. This is too much for storage water heaters – in fact, it will work as a flow. This water heater provides continuous hot plumbing in the sports hall or bath luxury with multiple Jacuzzis and showers.
Floor Storage SB (unlike SHO) series is not equipped with heating flanges. Heating flanges FCR various capacities and diameters (180 mm, 210 mm and 280 mm), in general, a separate product. They are used not only in devices Stiebel Eltron , but also in storage water heaters of other firms. Flanges FCR does not require additional automation – all necessary pre-provision. Flanges are the heating function of a reduced-night rate, automatically or manually switched to full power if the bulk of the hot water was depleted. In devices SB series can also install heating element BGC (from 1 to 6 kW) for a more uniform heating of the upper part of the tank.
The only “small” from the water heaters STIEBEL ELTRON in sizes from 200 to 400 liters. This model series of SHW. They are equipped with universal TENami, so the device can connect at one and three phases. When you connect a single-phase heating element can be switched on the power of 2-4 kW, with a three-phase – up to 6 kW. The presence of universal heaters allows for switching capacity. For example, you can increase the heating rate for the period of peak water withdrawals (general cleaning, or visit relatives).
Such a wide range of water heaters on the ratio of the volume and capacity, which has no analogues in the Russian market, to find the best possible solutions to the problems of preparing hot water for everything from small cottages to industrial enterprises.